|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Set of 3)
|
|
|
- Set of 3 MOTO Fixed Start Monitor stands
- 25 of Vertical travel with remote control
- 10 x 10 Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 3 stands and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Pair)
|
|
|
- Pair of MOTO Fixed Start Monitor stands
- 25 of Vertical travel with remote control
- 10 x 10 Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 2 stands and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Adjustable Start | Remote Control Adjustable Monitor Stand (Single)
|
|
|
- 25 of Vertical travel with remote control
- 12" x 15 Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 1 stand and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Single)
|
|
|
- 25 of Vertical travel with remote control
- 10 x 10 Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 1 stand and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 4 | 56" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-4 Monitor stands
- 56" Height, 40-49 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 3 | 56" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-3 Monitor stands
- 56" Height, 30-39 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 2 | 56" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-2 Monitor stands
- 56" Height, 20-29 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 4 | 46" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-4 Monitor stands
- 46" Height, 40-49 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ27 | 56" Monitor Stand for Barefoot MM27 (Pair)
|
|
|
- Pair of ADJ27 Monitor stands
- 56" Height,17" x 23" Base, Special MM27 Speaker platform
- Best tools for supporting Barefoot MM27 monitors
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 1 | 56" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-1 Monitor stands
- 56" Height, 10-19Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ3 | 56" Dual Monitor Stand (Pair)
|
|
|
- Pair of ADJ3 Monitor stands
- 56" Height, 2 x 12" x 16" Speaker Platforms, 17" x 23" Base
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 3 | 46" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-3 Monitor stands
- 46" Height, 30-39 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 2 | 46" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-2 Monitor stands
- 46" Height, 20-29 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 1 | 46" Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADMID-1 Monitor stands
- 46" Height, 10-19 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors DAW Composer 1 | DAW with Music Keyboard + 1 Redmount VESA Mount
|
|
|
- Supports a flat screen monitor and music keyboard in a recording studio
- Heavy and balanced
- Independently adjustable keyboard platform and video mount
- Made of extra strong large section square steel tubing and heavy steel
- Compact and portable
- Can be converted to DAW Composer 2
- Black finish with light texture
- Includes Music keyboard mount, 1 Redmount VESA mount and HD casters
|
|
|
|
|
|
|
|
|
|
Sound Anchors DAW2X | DAW with 2 Redmount VESA Mounts
|
|
|
- Supports 2 flat screen monitors, keyboard and mouse in recording studio
- Position monitors exactly where you want them, can be panned or tilted
- Heavy and sturdy
- Independently adjustable keyboard platform and video mount
- Made of extra strong large section square steel tubing and heavy steel
- Can be converted to DAW1x
- Black finish with light texture
- Includes 25" x 10" Keyboard platform, 2 Redmount VESA mounts and HD casters
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ2 | 56" Monitor Stand (Pair)
|
|
|
- Pair of ADJ2 Monitor stands
- 56" Height, 10" x 12" Speaker Platform, 17" x 23" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ2 | 44" Monitor Stand (Pair)
|
|
|
- Pair of ADJ2 Monitor Stands
- 44" Height, 10" x 12" Speaker Platform, 17" x 23" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ1 | 56" Monitor Stands (Pair)
|
|
|
- Pair of ADJ1 Monitor stands
- 56" Height, 10" x 12" Speaker Platform, 14" x 17" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
- Professional,high value, performance tools for your recording studio
|
|
|
|
|
|
|
|
|
|
Sound Anchors COMPADJ | 32" Compact Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADJ27 Monitor stands
- 56" Height,17" x 23" Base, Special MM27 Speaker platform
- Best tools for supporting Barefoot MM27 monitors
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
