|
|
|
|
|
|
Sound Anchors ADMID 1 | 56" Adjustable Monitor Stand (Pair)
|
Our Price: $1,390.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADMID-1 Monitor stands
- 56" Height, 10-19Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 2 | 56" Adjustable Monitor Stand (Pair)
|
Our Price: $1,490.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADMID-2 Monitor stands
- 56" Height, 20-29 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 3 | 56" Adjustable Monitor Stand (Pair)
|
Our Price: $1,590.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADMID-3 Monitor stands
- 56" Height, 30-39 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADMID 4 | 56" Adjustable Monitor Stand (Pair)
|
Our Price: $1,690.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADMID-4 Monitor stands
- 56" Height, 40-49 Width, Custom speaker platform
- Speaker is supported on two ½ x 2 flat steel bars
- Made of large section square steel tubing, rectangular steel tubing, 1/2" steel bar, with large grade 8 fasteners
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled sand, shot, or kitty litter to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ1 | 56" Monitor Stands (Pair)
|
Our Price: $1,190.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADJ1 Monitor stands
- 56" Height, 10" x 12" Speaker Platform, 14" x 17" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
- Professional,high value, performance tools for your recording studio
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ3 | 56" Dual Monitor Stand (Pair)
|
Our Price: $1,550.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADJ3 Monitor stands
- 56" Height, 2 x 12" x 14" Speaker Platforms, 17" x 23" Base
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ2 | 56" Monitor Stand (Pair)
|
Our Price: $1,250.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADJ2 Monitor stands
- 56" Height, 10" x 12" Speaker Platform, 17" x 23" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ27 | 56" Monitor Stand for Barefoot MM27 (Pair)
|
Our Price: $1,390.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Pair of ADJ27 Monitor stands
- 56" Height,17" x 23" Base, Special MM27 Speaker platform
- Best tools for supporting Barefoot MM27 monitors
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
DanMark XLNT-J1-1256 | 56" Speaker Stand with 10" x 12" Shelf | Pair
|
Our Price: $1,249.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Allows height and tilt adjustment of the monitor
- High quality powder coat finish
- Constructed with heavy duty, 2 square steel tubing and aluminum plate
- Welded construction simplifies assembly and makes these stands strong, rigid and stable
- Exclusive nylon non-marring adjustable feet balance the unit and protect floor surfaces
- Equipped with Sorbathane pads for use between the speaker and stand
- Pre-filled with internal dampening material formulated to eliminate resonance and add mass
- A professional, high value, performance tool for your recording studio
- Handcrafted in the USA
|
|
|
|
|
|
|
|
|
|
DanMark XLNT-J1-1456 | 56" Speaker Stand with 10" x 14" Shelf | Pair
|
Our Price: $1,249.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)
|
|
|
- Allows height and tilt adjustment of the monitor
- High quality powder coat finish
- Constructed with heavy duty, 2 square steel tubing and aluminum plate
- Welded construction simplifies assembly and makes these stands strong, rigid and stable
- Exclusive nylon non-marring adjustable feet balance the unit and protect floor surfaces
- Equipped with Sorbathane pads for use between the speaker and stand
- Pre-filled with internal dampening material formulated to eliminate resonance and add mass
- A professional, high value, performance tool for your recording studio
- Handcrafted in the USA
|
|
|
|
