|
|
|
|
|
|
Burl Audio B26 Orca | Monitor Controller
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Direct coupled, discrete, class-A signal path
- 3 stereo mix inputs, 2 stereo tape return inputs, RCA stereo input
- 2 stereo speaker outputs
- Audiophile 0.1% matched resistor, stepped attenuator for control room level
- Independent studio/phones send and level
- Talkback function (external mic required)
- External meter output
- Control room and Studio headphone/speaker outputs with independent routing
|
|
|
|
|
|
|
|
|
|
Burl Audio BAD8 | 8-Channel AD Daughter Card
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 44.2k Hz to 192k Hz, 24 bit, 8 channel ADC
- Proprietary, high definition, Burl Audio BX1 transformer input
- Next generation, all class-A, discrete transistor signal path with zero feedback, zero circuit path capacitors
- Next generation AD conversion
- Low latency
- 8-Channel DSUB connectivity
|
|
|
|
|
|
|
|
|
|
Unity Audio Mini Rock | Active 2-Way Monitor | Pair
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 way active monitor
- Low frequency extension
- Fast transient response
- 5.9" double magnet woofer
- 2 x 180 watt Class D amplifiers
- Closed cabinet design
- Cabinet side mounting holes for Type 50 speaker brackets
|
|
|
|
|
|
|
|
|
|
Unity Audio Boulder MKIII | Active 3-Way Monitors | Pair
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 x 8.5" crystal membrane woofers
- 1 x Dual concentric 5" X-Jet mid range and 50kHz folded ribbon tweeter
- Improved impulse and power control, dynamic range, and frequency response
- Sealed baltic birch 18mm plywood cabinet
- 2 x Class D 300 watt amplifiers, including dedicated PSU for woofers
- 2 x Discrete A/B amplifiers
- Balanced XLR input
|
|
|
|
|
|
|
|
|
|
Unity Audio The Rock MKIII | Active 2 Way Monitor | Pair
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 way active monitors
- Sealed Baltic Birch 12mm Plywood Cabinet
- Corian 12mm Front Baffle Design
- 2x 180 watt Class D amplifiers
- 50kHz folded ribbon tweeter
- 180mm (7") Crystal Membrane Woofer
- Balanced XLR input
- Un-balanced RCA gold plated phono input
|
|
|
|
|
|
|
|
|
|
Unity Audio The Rock MKIII | Active 2 Way Monitor | Single
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 way active monitor
- Sealed Baltic Birch 12mm Plywood Cabinet
- Corian 12mm Front Baffle Design
- 2x 180 watt Class D amplifiers
- 50kHz folded ribbon tweeter
- 180mm (7") Crystal Membrane Woofer
- Balanced XLR input
- Un-balanced RCA gold plated phono input
|
|
|
|
|
|
|
|
|
|
SPL Crimson 3 | USB Interface & Monitor Controller (White)
|
Retail Price: $1,299.00 Our Price: $999.00
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 16 Inputs
- 6 Recording Channels (24Bit/192kHz)
- 2 High-Quality Discrete Mic Preamps
- 2 Instrument Inputs
- 4 Balanced Line Inputs
- Stereo Digital and MIDI I/Os
- Phonitor Matrix and Talkback Mic
|
|
|
|
|
|
|
|
|
|
SPL DMC | Mastering Console
|
Retail Price: $7,499.00 Our Price: $6,499.99
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 3 RU Dual channel mastering console
- 4 Stereo inputs and 4 stereo sources
- 3 Stereo and 2 mono speaker outputs
- 0.25dB Stepped input & insert return trims
- Phonitor direct output
- 2 Stereo recording outputs
- Expandable multi-channel monitoring
- Stereo and mono metering outputs
|
|
|
|
|
|
|
|
|
|
SPL DMC | Mastering Console (Red)
|
Retail Price: $7,499.00 Our Price: $6,499.99
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 3 RU Dual channel mastering console
- 4 Stereo inputs and 4 stereo sources
- 3 Stereo and 2 mono speaker outputs
- 0.25dB Stepped input & insert return trims
- Phonitor direct output
- 2 Stereo recording outputs
- Expandable multi-channel monitoring
- Stereo and mono metering outputs
|
|
|
|
|
|
|
|
|
|
Sound Anchors Project 4 | 36-46" Monitor Stands (Pair)
|
|
|
- Pair of Project 4 Monitor stands
- Made of large section square steel tube rectangular steel tube and 1/4" steel plate
- One piece all welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled with sand, shot or kitty litter by the end user to reduce resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors Project 4 | 12-36" Monitor Stands (Pair)
|
|
|
- Pair of Project 3 Monitor stands
- Made of large section square steel tube rectangular steel tube and 1/4" steel plate
- One piece all welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled with sand, shot or kitty litter by the end user to reduce resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors Project 3 | 37-46" Monitor Stands (Pair)
|
|
|
- Pair of Project 3 Monitor stands
- Made of large section square steel tube rectangular steel tube and 1/4" steel plate
- One piece all welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled with sand, shot or kitty litter by the end user to reduce resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors Project 3 | 12-36" Monitor Stands (Pair)
|
|
|
- Pair of Project 3 Monitor stands
- Made of large section square steel tube rectangular steel tube and 1/4" steel plate
- One piece all welded construction makes stands strong, rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Can be filled with sand, shot or kitty litter by the end user to reduce resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Set of 3)
|
|
|
- Set of 3 MOTO Fixed Start Monitor stands
- 25” of Vertical travel with remote control
- 10” x 10” Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 3 stands and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Pair)
|
|
|
- Pair of MOTO Fixed Start Monitor stands
- 25” of Vertical travel with remote control
- 10” x 10” Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 2 stands and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Fixed Start | Remote Control Adjustable Monitor Stand (Single)
|
|
|
- 25” of Vertical travel with remote control
- 10” x 10” Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 1 stand and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MOTO Stand Adjustable Start | Remote Control Adjustable Monitor Stand (Single)
|
|
|
- 25” of Vertical travel with remote control
- 12" x 15” Speaker platform
- Made of large section square steel tubing and aluminum plate
- Welded construction which makes stands strong and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using our proprietary methods and materials to eliminate resonance and add mass
- Cost effective and high performing
- Hand crafted in the USA
- Includes 1 stand and 1 controller
|
|
|
|
|
|
|
|
|
|
Sound Anchors MINIADJ | 12" Mini Adjustable Monitor Stand (Pair)
|
|
|
- Pair of MINIADJ Monitor stands
- 12" Adjustable height, 10 x 10 Speaker platform, 12" x 12" Base
- Made of large section square and rectangular steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Four rubber cones to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
- Professional,high value, performance tools for your recording studio
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors FSTT | 24" Freestanding Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of FSTT Monitor stands
- 24” Height, 10” x 12” Speaker platform, 10” x 10” Base
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Offers infinite tild adjustment
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors FSTT | 18" Freestanding Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of FSTT Monitor stands
- 18” Height, 10” x 12” Speaker platform, 10” x 10” Base
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Offers infinite tild adjustment
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors FSTT | 12" Freestanding Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of FSTT Monitor stands
- 12” Height, 10” x 12” Speaker platform, 10” x 10” Base
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Offers infinite tild adjustment
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors DAW Composer 1 | DAW with Music Keyboard + 1 Redmount VESA Mount
|
|
|
- Supports a flat screen monitor and music keyboard in a recording studio
- Heavy and balanced
- Independently adjustable keyboard platform and video mount
- Made of extra strong large section square steel tubing and heavy steel
- Compact and portable
- Can be converted to DAW Composer 2
- Black finish with light texture
- Includes Music keyboard mount, 1 Redmount VESA mount and HD casters
|
|
|
|
|
|
|
|
|
|
Sound Anchors DAW2X | DAW with 2 Redmount VESA Mounts
|
|
|
- Supports 2 flat screen monitors, keyboard and mouse in recording studio
- Position monitors exactly where you want them, can be panned or tilted
- Heavy and sturdy
- Independently adjustable keyboard platform and video mount
- Made of extra strong large section square steel tubing and heavy steel
- Can be converted to DAW1x
- Black finish with light texture
- Includes 25" x 10" Keyboard platform, 2 Redmount VESA mounts and HD casters
|
|
|
|
|
|
|
|
|
|
Sound Anchors DAW1X | DAW with 1 Redmount VESA Mount
|
|
|
- Supports flat screen monitor, keyboard and mouse in recording studio
- Heavy and sturdy
- Independently adjustable keyboard platform and video mount
- Made of extra strong large section square steel tubing and heavy steel
- Compact and portable
- Can be converted to DAW 2x
- Black finish with light texture
- Includes 25" x 10" Keyboard platform, 1 Redmount VESA mount + HD casters
|
|
|
|
|
|
|
|
|
|
Sound Anchors COMPADJ | 32" Compact Adjustable Monitor Stand (Pair)
|
|
|
- Pair of ADJ27 Monitor stands
- 56" Height,17" x 23" Base, Special MM27 Speaker platform
- Best tools for supporting Barefoot MM27 monitors
- Each stand engineered to correctly hold pair of monitors
- Allows height and tilt adjustment of both monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors BOTT | 24" Bolt-on Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of BOTT Monitor stands
- 24” Height, 10” x 12” Speaker platform, 10” x 10” Base, 6” x 3” Mounting plate
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Fasten to desktop to avoid knocking off or changing position
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors BOTT | 18" Bolt-on Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of BOTT Monitor stands
- 18” Height, 10” x 12” Speaker platform, 10” x 10” Base, 6” x 3” Mounting plate
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Fasten to desktop to avoid knocking off or changing position
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors BOTT | 12" Bolt-on Adjustable Tabletop Stands (Pair)
|
|
|
- Pair of BOTT Monitor stands
- 12” Height, 10” x 12” Speaker platform, 10” x 10” Base, 6” x 3” Mounting plate
- Made of large section square steel tubing and aluminum plate
- Designed to elevate small monitors above desktop
- Fasten to desktop to avoid knocking off or changing position
- Special sorbathane pads are provided for use between the speaker and stand
- Hand crafted in the USA
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ2 | 56" Monitor Stand (Pair)
|
|
|
- Pair of ADJ2 Monitor stands
- 56" Height, 10" x 12" Speaker Platform, 17" x 23" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
|
|
|
|
|
|
Sound Anchors ADJ2 | 56" Monitor Stand (Single)
|
|
|
- 56" Height, 10" x 12" Speaker Platform, 17" x 23" Base
- Allows height and tilt adjustment of monitors
- Made of large section square steel tubing and aluminum plate
- Structural grade welded construction makes them rigid and stable
- Spiked at the floor to anchor your monitors in space
- Special sorbathane pads are provided for use between the speaker and stand
- Pre-filled using proprietary methods and materials to eliminate resonance and add mass
|
|
|
|
