|
|
|
|
 |
Focusrite RedNet AM2 | Stereo Dante Headphone Amplifier and Line-Out Interface
|
Our Price: $439.99 (Free Brainworx bx_console Focusrite Plugin with this purchase)
|
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- Convenient headphone / loudspeaker stereo monitoring solution for Dante gives outputs wherever they are needed
- Digital to analog conversion provides transparent and accurate audio quality
- Power to drive even high impedance headphones at significant levels - suitable for drums or other on-stage applications
- Independent headphone and line out level controls for maximum control
- Integrated mute switch - instantly kill the signal feeding external power amps or speakers
- Power over Ethernet (PoE) or via included 12 VDC power supply
- Integrated Gigabit Ethernet switch allows connection of additional network device
- Mic stand mount - bush on the base of the metal case allows simple mounting
- Dual XLR line level outputs (+18 / +24 dBu software-switchable)
- 1/4" TRS stereo headphone output
|
|
 |
|
|
|
|
 |
Focusrite ISA ADN2 | Two-Channel A-D Card for ISA One
|
Our Price: $499.99 (Free Brainworx bx_console Focusrite Plugin with this purchase)
|
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- Two-channel analog-to-digital converter for ISA One
- Up to 24-bit / 192 kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports with redundancy and auto switchover in case of failure
- Two-channel XLR connection for AES3 output
- Two-channel RCA connection for S/PDIF output
- Two-channel TOSLINK connector for ADAT output
- Word Clock I/O on BNC connectors allows synchronization to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
- RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
|
|
 |
|
|
|
|
 |
Lynx Studio Technology LT-DANTE | LSlot interface for Classic Aurora
|
|

- Dante expansion card for Classic Aurora converter
- Allows for easy connectivity to a Dante audio network
- Extremely low latency
- Uses standard and affordable CAT 5 and CAT 6 cables
- ROHS compliant
- Designed and manufactured in the USA by Lynx Studio Technology
|
|
 |
|
|
|
|
 |
Lynx Studio Technology LT-DANTE | LSlot interface for Aurora (n)
|
|

- Dante expansion card for Aurora (n) converter
- Allows for easy connectivity to a Dante audio network
- Extremely low latency
- Uses standard and affordable CAT 5 and CAT 6 cables
- ROHS compliant
- Designed and manufactured in the USA by Lynx Studio Technology
|
|
 |
|
|
|
|
 |
Lynx Studio Technology LT-DANTE | LSlot interface for Hilo
|
|

- Dante expansion card for Hilo converter
- Allows for easy connectivity to a Dante audio network
- Extremely low latency
- Uses standard and affordable CAT 5 and CAT 6 cables
- ROHS compliant
- Designed and manufactured in the USA by Lynx Studio Technology
|
|
 |
|
|
|
|
 |
Focusrite ADN8 | 8-Channel A-D Card for ISA 428/828 MkII
|
Our Price: $699.99 (Free Brainworx bx_console Focusrite Plugin with this purchase)
|
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- Eight-channel analog-to-digital interface for ISA 428 MkII and ISA 828 MkII
- Up to 24-bit / 192 kHz sample rate
- Dante connectivity via Primary and Secondary Ethernet ports for redundancy and auto switchover in case of failure
- Eight-channel AES59 DB25 output connection for AES3
- Two TOSLINK connectors for ADAT (8 channels at up to 96 kHz; 4 channels at 192 kHz)
- Word Clock I/O on BNC connectors allows synchronization to multiple digital sources, for syncing the Dante network to house clock, or for syncing external equipment to the Dante network
- RedNet Control and Dante Controller software allow Dante routing and control from a computer; no hardware patching required
|
|
 |
|
|
|
|
 |
Burl Audio BMB3 | Dante Motherboard
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- 2 Dante Ethernet ports (sold standard with one port)
- 64-channel IO at 44.1k, 48k, 88.2k, 96k
- 32-channel IO at 176.4k, 192k
- 2 BNC Word Clock outputs
- 1 BNC Word Clock input
|
|
 |
|
|
|
|
 |
Focusrite RedNet X2P | 2x2 Dante Audio Interface with Red Evolution Mic Pres
|
Our Price: $949.99 (Free Brainworx bx_console Focusrite Plugin with this purchase)
|
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Stereo 2x2 audio interface for Dante AoIP networks
- Two Red Evolution mic preamps for mic, line, or instrument level inputs
- Power-over-Ethernet supplied: IEEE 802.3af compliant
- Up to 24-bit, 96 kHz sampling rates
- Robust steel and aluminum chassis
- Local input mix to allow personalized monitoring
- Powerful headphone output, even with high-impedance headphones
- Local control lockout of mic settings, output settings, or both
- Up to 24 dBu line output levels
- Independent level control of headphone and line outputs
|
|
 |
|
|
|
|
 |
Focusrite RedNet PCIeR | Dedicated Dante Audio Interface Card with Network Redundancy
|
Our Price: $1,079.99 (Free Brainworx bx_console Focusrite Plugin with this purchase)
|
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- Dual Ethernet ports for full redundancy
- Compatible with any Dante network
- Up to 192 kHz sample rate
- 128 channels in and 128 channels out at 96 kHz and below
- 64 channels in and 64 channels out at 176.4 kHz and 192 kHz
- Under 3 ms analog-to-analog round-trip latency through DAW with Focusrite RedNet A-D/D-A (dependent on ASIO/Core Audio buffer size)
- ASIO and Core Audio drivers
- Thunderbolt PCIe chassis compatible
|
|
 |
|
|
|
|
 |
Burl Audio B16 Mothership BMB3 | 16 Ch. Configurable AD/DA with Dante Motherboard
|
|

- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- 2RU main chassis
- BMB3 (Dante) motherboard
- 1 BNC Word Clock In
- 2 BNC Word Clock Out
- 3 Card slots
- All slots accept AD/DA, AES and BCLK
- 4 Channel input cards and 8 channel output analog cards
|
|
 |