|
|
|
|
|
|
Ear Trumpet Labs Evelyn | Large-Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Dual fixed-cardioid large (26mm) diaphragm condenser capsules mounted in pivoting heads, spaced ideally for ORTF stereo
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Dimensions: 7” x 11” x 1 3/4”; heads are 3” in diameter
- Includes metal tool case with foam padding
- Includes 5-pin XLR to dual 3-pin XLR adapter cable
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Mabel | Large-Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Multiple switch-selectable patterns - cardioid, omni, figure-8
- Pivoting head for ease of positioning
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Body fits standard microphone clips
- Dimensions: 8 1/2” x 4 1/2” x 1 3/4”; head is 2 1/2” in diameter
- Includes metal tool case with foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Edwina | Large Diaphragm Condenser Mic (Stereo Pair)
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Handmade with unique appearance
- Tightly matched stereo pair - better than 1 db match from 60 - 20k
- Large 26mm diaphragm condenser capsule mounted in a pivoting bracket
- Capsule electronics tuned for excellent feedback rejection
- Side or end address, using pivot
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter
- Transformerless FET fully balanced electronics
- Dimensions: 8 3/4" x 4" x 1 3/4"; head is 3" in diameter
- Includes metal tool case with foam padding and mic clip
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Josephine | Large-Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Capsule and electronics tuned for close vocal use on the loudest of stages with excellent feedback rejection
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Dimensions: 12” x 8 1/2” x 3”; head is 3” in diameter
- Includes metal tool case with foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Myrtle | Large-Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Handmade with unique appearance
- Large diaphragm condenser capsule with a cardioid pickup pattern
- Unique headbasket with eight-spring suspension
- Pivoting joint between ring and body allows convenient positioning
- Internal multilayer silk pop filter
- Transformerless FET fully balanced electronics
- Dimensions: 12" x 6" x 2 3/8"
- Includes metal tool case with foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Louise | Large-Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Handmade with unique appearance
- Large diaphragm condenser capsule with a cardioid pickup pattern
- Tea-ball head basket capsule assembly spring-mounted in 6” chrome ring
- Pivoting joint between ring and body allows convenient positioning
- Internal multilayer silk and foam pop filter
- Transformerless FET fully balanced electronics
- Dimensions: 12" x 6" x 2 3/8"
- Includes metal tool case with foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Delphina | Large Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Side or end address, using pivoting brass bracket
- Capsule and electronics tuned for close to medium distance use on the most difficult stages with excellent feedback rejection
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Body fits standard microphone clips
- Dimensions: 8 3/4” x 4” x 1 3/4”; head is 3” in diameter
- Includes metal tool case w/ foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Chantelle | Large Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Hand-made microphone with unique appearance
- Side or end address, using pivoting bracket
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Dimensions: 8” x 2” x 2”; head is 2” in diameter
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Nadine | Large Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Unique, easy-to-use mounting system designed specifically for upright bass. 14" Mogami cable and washer-mounted head to fit all sizes of upright bass.
- Capsule and electronics tuned for live use with excellent feedback rejection
- Internal shock dampers for minimal handling noise
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Dimensions: 8” x 2” x 2”; head is 2” in diameter
- Includes metal tool case w/ foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Edna | Small Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Handmade with unique appearance
- Side address
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter, for effective control of plosives without loss of clarity
- Transformerless FET fully balanced electronics
- Highest quality hand-wired electronic components - film caps, precision resistors, hand tested and matched transistors, with component values tuned for the individual circuit
- Dimensions: 8 1/2” x 2 1/2” x 1 3/4”
- Includes metal tool case w/ foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Edwina | Large Diaphragm Condenser Mic
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Handmade with unique appearance
- Large 26mm diaphragm condenser capsule mounted in a pivoting bracket
- Capsule electronics tuned for excellent feedback rejection
- Side or end address, using pivot
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter
- Transformerless FET fully balanced electronics
- Dimensions: 8 3/4" x 4" x 1 3/4"; head is 3" in diameter
- Includes metal tool case w/ foam padding
- Requires 48V phantom power
|
|
|
|
|
|
|
|
|
|
Ear Trumpet Labs Edwina | Large Diaphragm Condenser Microphone | Open Box
|
Regular Price: $599.00 Open Box Price: $510.00
|
|
|
- LIKE NEW WITH 6 MONTH WARRANTY | CALL (323) 319-5936...
- Handmade with unique appearance
- Large 26mm diaphragm condenser capsule mounted in a pivoting bracket
- Capsule electronics tuned for excellent feedback rejection
- Side or end address, using pivot
- Internal shock dampers for minimal handling noise
- Integral silk and mesh pop filter
- Transformerless FET fully balanced electronics
- Dimensions: 8 3/4" x 4" x 1 3/4"; head is 3" in diameter
- Includes metal tool case w/ foam padding
- Requires 48V phantom power
|
|
|
|
