|
|
|
|
|
|
IGS Audio DTL | Double Triode Limiter + Microphone Preamp
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Stereo triode limiter and mic pre
- +48V, phase, -20dB pad
- Input gain, output and limiter controls
- Dual analog VU meters
- 2 Hi-Z Instrument level inputs
- Edcor and Sowter transformers
|
|
|
|
|
|
|
|
|
|
Rupert Neve Designs 5211 | Two Channel Microphone Preamplifier
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- 2 Channel Rupert Neve designed mic preamp
- Custom output transformer from the flagship Shelford Channel
- 72dB gain
- Sweepable high-pass filters for precise control
- Versatile, flattering, and uncompromising front end for any signal path
|
|
|
|
|
|
|
|
|
|
AEA Ribbon Mics RPQ2 | Ribbon Microphone Preamp with EQ / DI
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 Channels with 81dB of sweet and quiet JFET gain
- NoLoad 63k ohm high-impedance circuitry providing better overall transients, frequency response, and higher output sensitivity
- High-resolution, high-impedance front-panel 1/4" DIs
- Mic/Line mode with Post-Mic and Pre-EQ Inserts for alternative and convenient routing options
|
|
|
|
|
|
|
|
|
|
Fredenstein F200 | Dual Mic-Pre and Compressor
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING AVAILABLE | CALL (323) 319-5936...
- 2-channel microphone preamp and compressor
- 2 completely separate processors — use them individually or combine them into dual channel strips
- Separate mic and compressor output levels for effortless parallel compression
- Mic preamp features 60dB of gain and a 20dB pad, highpass filter, polarity reversal, phantom power, and DI
- Compressor includes controls for attack time, release time, compression ratio (from 2:1 to 20:1), and stereo link
- Experience warm, natural sound via zero-negative-feedback design
- Clip Led for the mic-pre turns on at +24 dBu output levels
- VU meter displays compressor gain reduction or output level
|
|
|
|
|
|
|
|
|
|
Warm Audio WA273 | Dual Channel British Microphone Preamp
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- Dual channel, class A, '73-Style British mic preamp
- 80dB of gain - resistor stepped gain switch
- Tone button - changes input transformer impedance for varying tone
- 48V phantom power, polarity switch
- 4 position inductor based hipass filter - 50, 80, 160, 300 Hz
- XLR mic input, line level TRS input, TS send/receive insert jacks
- XLR & TRS line level outputs
- FREQ response 20Hz - 20kHz _/-.5dB
- 19" rackmountable
- Internal IEC 115V/230V power inlet
|
|
|
|
|
|
|
|
|
|
AEA Ribbon Mics TRP 2 | Dual Channel Ribbon Microphone Preamp
|
|
|
- CUSTOM MOGAMI & NEUTRIK GOLD CABLING INCLUDED | CALL (323) 319-5936...
- 2 Channels with 83 dB of sweet and quiet JFET gain
- Switchable phantom-power, polarity reverse, and high-pass filter
- 63 ohm high-impedance circuitry provides better overall transients, frequency response, and high output sensitivity
- Optimized for ribbon mics, condensers, and dynamics
- IU half-rack with optional hardware for mounting one or two units together
|
|
|
|
|
|
|
|
|
|
BAE 1073MP | Dual Channel Microphone Preamp with PSU
|
|
|
- All Class A, transformer-coupled design in a 19" 1U chassis
- Line level XLR inputs for extra versatility as a line preamp
- High impedance DI for guitars and synths
- Illuminated push buttons
- Regulated linear power supply will run up to four channels
|
|
|
|
|
|
|
|
|
|
BAE 1073MPF | Dual Channel Microphone Preamp with Filter
|
|
|
- All Class A, transformer-coupled design in a 19" 1U chassis
- Inductor based high pass filter
- Line level XLR inputs for extra versatility as a line preamp
- High impedance DI for guitars and synths
- Same Class A components as the 1073 and 1084
- Illuminated push buttons
|
|
|
|
|
|
|
|
|
|
BAE 1073MPF | Dual Channel Microphone Preamp + Filter with PSU
|
|
|
- All Class A, transformer-coupled design in a 19" 1U chassis
- Inductor based high pass filter
- Line level XLR inputs for extra versatility as a line preamp
- High impedance DI for guitars and synths
- Same Class A components as the 1073 and 1084
- Illuminated push buttons
- Regulated linear power supply will run up to four channels
|
|
|
|
|
|
|
|
|
|
BAE 312A | Dual Channel Microphone Preamp + DI
|
|
|
- Made using Avedis 1122 opamps
- Supplied with Jensen input and output transformers
- Switches have gold contacts for long life
- XLR connectors on the back for mic in/out + phone jack in front for direct input
- High impedance direct input for guitar and synthesizer
- Separate front panel switches for phantom power
|
|
|
|
