 |
 |
 |
|
High-Performance A/D-D/A Conversion
Ultralow Noise and Distortion
Advanced Stepped Gain Architecture
8 x Mic Preamps with 72 dB of Gain
8 x Analog I/O via DB25 Connector
AES, ADAT, and S/PDIF Digital I/O
Up to 192 kHz Sample Rate
For Mk II Thunderbolt/Dante Chassis
he Apogee Electronics Connect 8x8 MP is an expansion I/O module offering high-performance A/D and D/A conversion, eight high-gain mic preamps, and eight channels of analog and digital I/O for producers and engineers using Symphony I/O Mk II Thunderbolt or Dante chassis in personal, project, and commercial studios.
By utilizing Apogee's Advanced Stepped Gain Architecture, the Connect 8x8 MP delivers up to 72 dB of gain in 1 dB increments while maintaining ultralow noise, virtually nonexistent distortion, and noiseless gain adjustment.
Its analog I/O includes eight channels of balanced inputs and outputs on DB25 connectors. Additional DB25, TOSLINK optical, and RCA coaxial jacks provide connectivity for AES/EBU, ADAT, and S/PDIF digital inputs and outputs. The Connect 8x8 MP is easily installed in a Symphony I/O Mk II Thunderbolt or Dante chassis.
Requires Symphony I/O Mk II Thunderbolt or Dante chassis with available card slot.
Advanced Stepped Gain Architecture
Apogee's Advanced Stepped Gain Architecture introduces a mic preamp circuit that is dynamically optimized at different gain settings to provide superior bandwidth, ultralow noise, and nonexistent distortion across an expansive gain range of 0 to 72 dB. Digitally controlled analog switches shift the gears of the circuit at each gain setting to ensure the best sound and performance.
Transparent Conversion
High-performance A/D-D/A conversion designed for extreme audio clarity and sonic transparency
Flexible I/O
- Eight balanced analog inputs and outputs at up to 192 kHz via DB25 connectors
-
Eight microphone preamps with up to 72 dB of gain
-
Eight AES/EBU inputs and outputs (192 kHz single-wide compatible) via DB25 connector
-
TOSLINK optical inputs and outputs support ADAT, SMUX, and S/PDIF (8x8 ADAT at 44.1 or 48 kHz, 8x8 SMUX at 88.2 or 96 kHz, 2x2 S/PDIF at up to 96 kHz)
-
Coaxial input and output for 2x2 S/PDIF at up to 192 kHz
For Symphony I/O Mk II
Compatible with Apogee Symphony I/O Mk II Thunderbolt and Dante chassis
Connect Series Highlights
- Up to 72 dB of gain in 1 dB increments
-
Noiseless gain adjustment
-
+26 dBu maximum input level
-
Improved common mode noise rejection and EMI suppression for optimal performance
-
Switchable impedance (2.4 or 10 kilohms) to support passive mic splitting in live sound applications
-
Control all mic preamps from Symphony I/O’s front panel, the optional Apogee hardware remote control, or in the Apogee control software
-
Simplified and optimized signal path with fewer components and higher channel count
-
Available in configurations of 8, 16, 24, or 32 flagship mic preamps per unit
For more information on this or any other Apogee Electronics product, visit www.apogeedigital.com.
|
|
|
 |
|
 |
|