View Cart My Account

Affirm Financing Banner

  Home > Acoustics > Acoustic Room Kits > Up to 200 Square Feet Rooms >

Primacoustic London 16 | Acoustic Panel Room Kit (Beige)
Primacoustic London 16 | Acoustic Panel Room Kit (Beige)

Alternative Views:

Our Price: $2,445.00
No Interest | 24 Months w/ Affirm or 12 Months w/ Synchrony (Purchases over $300)

Availability: Usually Ships In 3 To 5 Business Days

Primacoustic London 16 - Acoustic Panel Room Kit (Beige)

  • Complete recording studio treatment kit in a box
  • Designed for rooms up to 200 sq ft (18.6 sq m)
  • 4 - 24" x 48" x 2" Beveled Edge Broadband Panels
  • 16 - 12" x 48" x 2" Beveled Edge Control Columns
  • 24 - 12" x 12" x 1" Square Edge Scatter Blocks
  • 48 Surface Impalers and 16 Corner Impalers
  • Wall anchors, screws and drill bit

The Broadway London 16 room kit is designed for rooms up to 200 sq ft or can be combined with other products to treat larger spaces. Ideally suited for studio control rooms and home theaters, these easy to use kits can be a single box acoustic treatment solution. The London 16 contains Broadway panels that tackle problems affecting any room, such as primary reflections, flutter echo, standing waves and excessive bass. In addition to acoustic panels, each London 16 room kit includes the corresponding mounting hardware and instructions for easy installation.

Broadway panels are made from high-density 6lb per cubic foot fiberglass, offering nearly five times greater absorption than typical low cost foam alternatives. This means that you get more absorption with less panels, while assuring an even absorption curve throughout the frequency range. The London 16 room kit is available in three fabric colors. 42 panels included.

For more information on this or any other Primacoustic product, visit
Average Customer Review: Average Customer Review: 5 of 5 5 of 5 Total Reviews: 1 Write a review.

  0 of 0 people found the following review helpful:
5 of 5 Room sound great March 28, 2016
Reviewer: Jeremy Wilson from Avendale, AZ United States  
Installation of the panels was super easy. The package also includes a drill bit for the appropriate size to install the impaling plates.

After the install, the room sounded fantastic. Room reflection was mostly non existent.

All in all, I setup the entire room in about 3 hours.

Trick for installing:

1) Line up the panels against the wall exactly how you would place them

2) Set a panel flat against the wall, and mark the wall at the top center of the panel, which would be for the bottom of the impaling plate.

3) Install the bottom impaling plate.

4) Measure 20 inches from the bottom impaling plate up, and mark the wall. Then, install the top impaling plate bottom screw where you marked. Then finish installing the plate.

5) Just mount the panel on the impaling plate.

easy as can be

Was this review helpful to you?

Browse for more products in the same category as this item:

Acoustics > Acoustic Room Kits > Up to 200 Square Feet Rooms
Brands > Brands L - Z > Primacoustic > Room Kits
Acoustics > Acoustic Room Kits
Brands > Brands L - Z > Primacoustic
Brands > Brands L - Z