Home > Recording > Monitoring > Subwoofers >

PSI Audio Sub A225-M | Dual 10" Powered Subwoofer (Black)
PSI Audio Sub A225-M | Dual 10" Powered Subwoofer (Black)


 
Alternative Views:



Our Price: $4,909.00



Availability: Contact Us For Availability
Product Code: PSI-A225-M-B
Qty:

Description
 
  • (2) 10" Woofer
  • Class-G Amplifier: 300 W
  • Frequency Response: 24 to 100 Hz
  • Max SPL: 116 dB
  • Stereo XLR Inputs and Outputs
  • Designed for Stereo and Multi-Channel
  • Built-In Anti-Resonance System
  • Decoupled Amplifier Module
  • Compatible with All PSI Audio Monitors
  • Anti-Slippage Stickers

    • The black PSI Audio Sub A225-M is a powered subwoofer designed to seamlessly extend the bandwidth of all PSI Audio's studio monitors. The 300W Class-G amplifier powers the two 10.2" woofers to provide a frequency response of 24 to 100 Hz at an SPL of 116 dB (half space).

    The double-box MDF enclosure offers a built-in anti-resonance system, while the amplifier unit is acoustically uncoupled to provide uncolored performance without artifacts. The rear panel offers two XLR inputs and outputs for working with satellite speakers and is well suited for stereo and multi-channel (surround) monitoring. The level / input sensitivity control helps audio input signal calibration, while the "Roll-Off" control aligns the low frequency response to room conditions. The PSI Audio Sub A125-M includes a power cord, anti-slippage stickers, and an individual frequency response diagram.

    • Built-in anti-resonance system in a double box cabinet
    • Class-G low temperature amplifier stage
    • Amplifier unit acoustically uncoupled from speaker cabinet
    • Real balanced input with outputs for satellite systems
    • Protection circuits with overload indicator
    • Designed for stereo and multichannel monitoring
    • Magnetically shielded for use close to video monitors
    • Phase and amplitude response compatible with all PSI Audio monitors
    • Adaptive Output Impedance (AOI) Technology: The AOI system is made up of a system that detects the movement of the membrane and the coil, as well as a filtered counter reaction. This is then tuned to achieve ideal dampening rate for each frequency
    • Compensated Phase Response (CPR) Technology: The CPR system is made up of several all-pass filters, each acting in a specific range of frequency and together obtaining a Compensated Phase Response. This provides a constant group delay that is kept to the bare minimum through our entirely analog technology
    • Phantom Standby Control (PSC) Technology: The PSC technology enables to remotely activate and deactivate the standby mode of your loudspeakers through the signal cable

    For more information on this or any other PSI Audio product, visit www.psiaudio.swiss.