 |
 |
 |
|
1-channel FET-based compressor with switchable Modern/Vintage modes
Modern mode uses an electronic input circuit for sonic transparency
Vintage mode engages a premium Carnhill input transformer for enhanced sonic depth and color
Side-chain highpass filter (60Hz/90Hz/150Hz) prevents excessive bass from triggering compression too much
Four ratio selection buttons: 4:1, 8:1, 12:1, and 20:1
Attack time ranges from 20 to 800 microseconds
Release time range from 50ms to 1,100ms
Stereo link capable, requires a single 1/4" mono cable (not included)
WesAudio Beta76 is a continuation of the WesAudio 1176 compressor. The introduction of several structural updates have improved upon the original version. One of the most important changes is two mode switch – Modern / Vintage – which decides the circuit of the desymmetrization of the input signal. Modern Mode is an electronic circuit, exactly the same as the previous version of the compressor and the Vintage mode – it’s a Carnhill input transformer. The result is a universal device with two different sound possibilities.
A True Bypass switch was introduced, as well as a high-pass filter in the Compressor’s Side Chain path.There are three cutoff frequencies – 60, 90, 150 Hz – thanks to which Beta76 is less sensitive to low frequencies. The filter is particularly beneficial to the operation of two compressors in a stereo pair, which are easily connected with a prepared Jack-Jack cable.
The entire system operates in class A. The element responsible for the gain reduction is a FET transistor, giving the effect of rapid and pure compression. There is a high quality Carnhill audio transformer on the output favorably affecting the final sound of the compressor. The housing is made from high quality brushed stainless steel, whereas the panel is 4 mm brushed aluminum.
For more information on this or any other WesAudio product, visit www.wesaudio.com.
|
|
|
 |
|
 |
|