Styled in a white finish, Genelec 8030C is a single 2-way active studio monitor designed to provide accurate mix referencing for audio engineers, musicians, and producers in project studios, small control rooms, or mobile setups. It features 100W of Class-D amplification driving a 5 1/8” woofer and 3/4” metal-dome tweeter, producing a frequency response of 47 Hz to 25 kHz.
A proprietary waveguide enhances imaging while the bass reflex port extends the low-frequency response. The aluminum enclosure is shaped to minimize diffraction. It supports a balanced input via an XLR 3-pin connector. Room compensation options include high- and low-frequency adjustments. There is a selectable power-saving mode that enables automatic power up/down via a signal-sensing circuit.
The 8030C offers multiple mounting options including threaded holes for compatibility with mic stands, OmniMount brackets.
The 8030 C comes with an Iso-Pod isolation stand.
Product Features:
- 50W 5" Woofer + 50W 3/4" metal dome tweeter
- Proprietary Waveguide
- Bass Reflex Port
- Treble and Bass Controls
- Low-Diffraction Aluminum Enclosure
- Balanced XLR Input
- Automatic Power-Saving Mode
- Multiple Mounting Options
- Includes Isolation Stand
Mounting Options
Genelec Mounting Solution
Genelec offers wide range of accessories and fixed mounting points to all common installation situations.
(1) 8000-402W Wall Mounting Bracket (White):
This wall mounting bracket is steady, and easy to install. The pan & tilt feature offers you various options to position your loudspeaker.
(2) 8000-333W Table Stand L-Shape (White):
With this stand it is easy to position the speaker on a table with better aiming to the listening position. The stand improves the acoustical performance by raising the monitors above the table level, causing less reflections from the table surface. The sturdy stand has a 0-20-degree upward tilt angle adjustment upwards. You can position your monitor either vertically or horizontally.
(3) 8000-436W Short Ceiling Mount (White):
Position your Genelec loudspeaker with this sturdy and reliable ceiling mount.
(4) 8000-442W Short Adjustable Ceiling Mount (White):
The adjustable ceiling mount is suitable for all 8000 series models. The mounting system has three different height positions, 400, 500 and 600 mm, and a down tilt feature of 90 degrees. A hollow circular tube with an inside diameter of 50 mm allows you to hide the cords, as it is possible to run them through the tube.
(5) 8000-444W Long Adjustable Ceiling Mount (White):
This mounting system has six different height positions, 700, 800, 900, 1000, 1100 and 1200 mm, and a down tilt feature of 90 degrees. A hollow circular tube with an inside diameter of 50 mm allows you to hide the cords, as it is possible to run them through the tube.
(6) 8000-416C Short Truss Mount w/ Clamp:
This simple but steady short truss mount comes with a clamp for Ø 50 mm tube.
(7) 8000-409B Floor Stand (37.4" - 56.3"):
The solid steel stand allows you to adjust the monitor height quickly between 37.4" - 56.3" by using a clamping screw and a safety pin. A broad round cast iron base (Ø 17.7") enables the load capacity up to 77 lbs. Also, the stand has a mounting 3/8" thread for any Genelec stand plate.
(8) 8000-425B Adjustable Height Table Stand:
Adjustable height table stand with a base plate that can be attached to a table or flat surface. Preferably used with stand plate and Iso-Pod for better monitor orientation. The telescopic tube length (301 to 527 mm) is designed for optimum monitor positioning behind or above computer screens. Screws and fixing nuts for a 40 mm thick table are included.
(9) 8000-422W Adjustable Wall Mount (White):
Adjustable and stable wall mount bracket.
Attach your Genelec loudspeaker securely to the wall with the 8000-422 wall mount bracket.
Precision by Triad-Orbit Mounting Solution
Immersive Sound Speaker Mount System offers many options for mounting onto walls and ceilings with Triad-Orbit Technology. This uniquely designed patent-pending speaker mounting system allows the installer to meet the critical demands of Dolby Atmos and immersive sound installations providing unparalleled flexibility in mounting and alignment options, saving time in installation room tuning and laser alignments.
(1) SM-UM1 | Direct Mount:
The most affordable speaker mount. Its universal face plate works with many speakers under 25 pounds. With the ability to adjust pan and tilt and lock positioning with geared fittings, the SM-UM1 is perfect for Dolby Atmos rooms where lighter speakers are being used.
(2) SM-UM1 + WM1 Wall Mount:
The WM1 is optional in the UM1 System, however, it’s highly recommended to improve your installation workflow.
If using the WM1, press it against the wall at your desired location and mark the mounting holes with a pencil. Then pre-drill into studs or place your anchors. Attach the WM1 to your wall.
If mounting the UM1 directly to the wall, place it in the desired location and mark the mounting holes. Pre-drill into studs or place anchors as with WM1, but mount it to the wall after connecting your speaker to the system.
(3) SM-SW1 + WM1 Wall Mount:
The SM-SW1 is the strongest, most precise speaker mount. With the ability to lock speaker tilt in 15-degree increments and pan on 30-degree increments, the SM-SW1 Speaker Mount is perfect for heavier speakers and critical listening spaces like Dolby Atmos mixing rooms.
The SW1 requires a WM1 Wall Mount due to the heavier weights of SM-SW1 compatible speakers. Fortunately it makes installation a breeze. Just press against the wall at your desired location and mark the mounting holes with a pencil. Then pre-drill into studs or place your anchors. Attach the WM1 to your wall.
IsoAcoustics Mounting Solutions
Featuring IsoAcoustics award winning isolation technology, V120 Mount is a studio monitor ceiling and wall mount that decouples studio monitors from wall and ceiling structures, mitigating structure borne vibrations from exciting the supporting surfaces.
The V120 isolation mount is adaptable to wall mount and ceiling structures and is designed to be compatible with many studio monitors weighing up to 40lbs (18.1kg).
(1) V120 Mount w/ V120 T-Adapter + C-Bracket:
Improved Spatial Openness and Clarity for Wall & Ceiling Mounted Pro Audio Speakers.
The C-Bracket will allow the studio monitors to be focused downwards, or tilted up to 45 upwards. If you need to tilt your studio monitors higher, then please use the L-Bracket instead of the C-Bracket.
(2) V120 Mount w/ V120 T-Adapter + L-Bracket:
The L-Bracket will allow the studio monitor to be focused horizontally, or tilt up to 45 degrees downwards. The C-Bracket will allow the studio monitors to be focused downwards, or tilted up to 45 upwards. If you need to tilt your studio monitors lower, then please use the C-Bracket instead of the L-Bracket.
.jpeg)
For more information on this or any other Genelec product, visit www.genelec.com.