Home > Recording > Monitoring > Subwoofers >

Adam Professional Audio Sub10 MK2 | 200W 10" Active Subwoofer
Adam Professional Audio Sub10 MK2 | 200W 10" Active Subwoofer


 
Alternative Views:



Our Price: $1,499.99



Availability: Click HERE for Availability
Product Code: ADAM-SUB10_MK2
Qty:

Description
 
  • 10" Coated Paper Woofer
  • Down-Firing Bass Port
  • Amplifier: 300W Peak
  • Frequency Range: 25 to 150 Hz
  • Maximum SPL: 113 dB
  • XLR and RCA Inputs
  • Phase Switch + Linkwitz-Riley Filters
  • Level and Crossover Controls
  • Auto Power On/Off

    • Audio engineers looking to fill out the low end response of any stereo or 5.1 surround monitoring system should check out the Adam Audio Sub10 MK2, a high-quality subwoofer well suited for professional and project studios. The Sub10 MK2 features a 200W RMS (300W peak) amplifier, which powers the 10" woofer. It offers both XLR and RCA I/O connectors for seamless integration into any system setup. The bandwidth of the Sub10 MK2 and the connected speakers may be adjusted separately, allowing it to be used with many different satellites.

    Crossovers are made as musical as possible thanks to variable fourth-order Linkwitz-Riley filters. The incoming signal can be phased from zero to 180 degrees for a great degree of flexibility in placement of the subwoofer. Rear-panel gain and filter adjustment controls are provided. A down-firing bass reflex tube avoids breathing noise. Multiple units may be chained together if desired. The Adam Audio Sub10 MK2 ships with a power cord and four protective rubber foot plugs.

    • Excellent low-end companion to any sound system
    • Full XLR and RCA I/Os
    • Cool-running 200W RMS (300W peak) amp uses pulse width modulation (PWM) to provide greater than 80% overall efficiency
    • Down-firing bass reflex tube reduces breathing noise
    • Multiple units may be chained
    • Bandwidth of the subwoofer and connected speakers may be adjusted separately
    • Variable fourth-order Linkwitz-Riley filters for musical crossovers
    • Incoming signal can be phased between 0 and 180 degrees, allowing a high degree of placement flexibility
    • Gain and filter controls on rear panel
    For more information on this or any other Adam Audio product, visit www.adam-audio.com.