 |
 |
 |
|
All the equipment and cabling to "Plug 'n Play" for you to start a Podcast today
Clean, slick setup includes premium Yellowtec m!ka arm, Shure MV7-S microphone, Shure headphones, and Duet 3 audio Interface
Internal wiring inside the arm is terminated to Neutrik Gold XLR
Yellowtec YT3201 Medium-Size Microphone Arm in Black (qty 1)
Made of durable silk-mat anodized aluminum, the m!ka Microphone Arm M aluminum is designed to hold microphones with a weight up to 2kg (4.5lbs). As the golden ratio out of our range of m!ka Mic Arms, the M-size Microphone Arm is the perfect allrounder in terms of microphone arrangements. The arm is a good choice to shape working desks or interviewing areas where the distance between arm and speaker is not higher than 31” (78.7cm).
By adjusting only a few knurled screws you can make sure Yellowtec’s m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.
Be it a switch in seats or a recording setup which is used by different persons, our m!ka Mic Arm allows you to customize your mic’s position within seconds. Fully compatible with the whole m!ka system, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.
Yellowtec YT3210 Table Clamp (qty 1)
Yellowtec Table Clamps is the fastest and easiest way to mount a m!ka arm. Use the Table Clamp to fix your m!ka arm to the edge region of your desk without the need to drill any holes. Simply place the Table Clamp on your desk and twist its parts against each other to achieve a proper fit to your individual desk. The Table Clamp fits every table with a panel thickness of 0.71-2.91 inches (18-74mm). It is not suitable for curved surfaces as it might slip off.
Shure MV7-S Podcast Microphone (qty 1)
Get a professional podcast sound with audio interfaces, hard disk recorders, or direct to computers and mobile devices with the Shure MV7 Podcast Mic, styled here in black. This is a professional-quality, broadcast-style dynamic microphone, one that can has both a conventional XLR connection and a USB port. It also supports a 3.5mm headphone output for direct monitoring.
The mic offers a unidirectional cardioid polar pattern, which is the best natural defense against room noise: since the capsule mostly captures what's directly in front of it, you won't pick up as much room noise as you would with another polar pattern. Use the mic in close proximity to your voice and you'll find it exhibits a clear, intelligible, and high-quality sound.
On the USB side, the mic provides broadcast-quality specs and intuitive functionality. Capture audio at sample rates and resolutions up to 48 kHz / 24-bit, which is the standard for editing and mixing broadcast audio. Use the integrated touch-panel interface on the mic itself to control levels, headphone volumes, monitor mix, and mic-mute. The free ShurePlus MOTIV Desktop Application will let you save your own presets, enable auto-level, add compression, EQ the signal, and more.
The mic is both attractive and durable, with that classic Shure end-address look and rugged all-metal design. The mic sits in an adjustable yoke that will fit a variety of stands and mounting options. Use the mic with your audio interface, hard disk recorder, mixer, computer (over USB Mini-B), select Android devices, and select iOS devices. Two cables are included, one a USB Mini Type-B to USB Type-A, the other a USB Mini Type-B to USB Type-C.
Shure SRH840 Headphones (qty 1)
The Shure SRH840 Professional Monitoring Headphones from Shure are perfect for Podcasting and critical listening.
A precisely tailored frequency response and 40mm neodymium dynamic drivers combine with total comfort and durability to provide the ultimate listening experience. The replaceable cable and included set of replacement ear pads ensure a long product life. Also includes threaded 1/4" (6.3mm) gold-plated adapter (comes with 1/8" and 1/4" options).
Apogee Duet 3 - Ultracompact 2x4 USB Type-C Audio Interface (qty 1)
Designed to be the audiophile-quality centerpiece of a mobile recording setup, the Apogee Electronics Duet 3 is a 2x4 USB Type-C audio interface bringing Apogee's legendary sonic performance and intuitive operability to an ultracompact, elegant, and durable form factor for musicians, producers, and songwriters in pursuit of their best sound no matter where they are. While the low-profile exterior combines an aluminum base with a Gorilla Glass top to make it durable and attractive, the internals boast built-in hardware DSP to power the included Symphony ECS Channel Strip plug-in for signal sculpting and polishing without bogging down your computer or iOS device.
It features two world-class microphone preamps with phantom power and plenty of gain to ensure robust amplification even for low-output ribbons and classic dynamics such as the Shure SM7B. It can also accept line-level signals or direct connections from instruments such as electric guitar and bass. With two balanced analog 1/4" TRS line/monitor outputs and a stereo 3.5mm headphone output, the Duet 3 can feed a set of monitors and your favorite headphones at the same time. The main and headphone outputs are independently addressable, giving the flexibility to route separate mixes to an artist in the studio, a performer onstage, or a house PA system.
|
|
|
 |
|
 |
|