All the equipment and cabling to "Plug 'n Play" for you to start a Podcast today
Clean, slick setup includes premium Yellowtec m!ka arm, Shure MV7+-K microphone, Shure headphones, and Duet 3 audio Interface
Internal wiring inside the arm is terminated to Neutrik Gold XLR
Yellowtec YT3201 Medium-Size Microphone Arm in Black (qty 1)
Made of durable silk-mat anodized aluminum, the m!ka Microphone Arm M aluminum is designed to hold microphones with a weight up to 2kg (4.5lbs). As the golden ratio out of our range of m!ka Mic Arms, the M-size Microphone Arm is the perfect allrounder in terms of microphone arrangements. The arm is a good choice to shape working desks or interviewing areas where the distance between arm and speaker is not higher than 31” (78.7cm).
By adjusting only a few knurled screws you can make sure Yellowtec’s m!ka Microphone Arm securely fastens your mic according to its weight, in any position you pull it to.
Be it a switch in seats or a recording setup which is used by different persons, our m!ka Mic Arm allows you to customize your mic’s position within seconds. Fully compatible with the whole m!ka system, you can take full advantage of the given variety of mounting options to tailor your setup to your individual needs.
Yellowtec YT3210 Table Clamp (qty 1)
Yellowtec Table Clamps is the fastest and easiest way to mount a m!ka arm. Use the Table Clamp to fix your m!ka arm to the edge region of your desk without the need to drill any holes. Simply place the Table Clamp on your desk and twist its parts against each other to achieve a proper fit to your individual desk. The Table Clamp fits every table with a panel thickness of 0.71-2.91 inches (18-74mm). It is not suitable for curved surfaces as it might slip off.
Shure MV7+-K Podcast Microphone (qty 1)
The Shure MV7+ Podcast Mic, styled here in black, makes getting a professional podcast sound easier than ever. Like the original MV7, the MV7+ is a high-quality, broadcast-style dynamic microphone that delivers a clear and present sound and features both a conventional XLR connection and a USB port, allowing you to use it with audio interfaces, mixers, hard disk recorders, or direct to computers and mobile devices. But this updated "+" version adds several key features to improve your podcasting experience, including a customizable full-color LED touch panel with metering, improved DSP functions for better sound quality with less noise, 3 reverb options, a USB-C connector, and deep integration with Shure's MOTIV Mix software for complete control over a wide range of sound-sculpting parameters.
What's New?
- Multicolor LED touch panel: add vibrant color to your sound with the LED touch panel. Select from 16.8 million hues and use it as an audio level meter or switch on an eye-catching pulse effect. Don't want a constant hot mic? Instantly mute the MV7+ by tapping anywhere on the LED panel.
- Real-time Denoiser: cutting-edge DSP technology eliminates ambient noise in your room and complements the mic's Voice Isolation Technology to ensure you sound great, even in imperfect recording conditions.
- Digital Popper Stopper: a virtual pop filter removes harsh plosive sounds, so you can avoid acoustic distractions on your audio tracks and a physical pop filter on camera when you're filming.
- Improved Auto-Level mode: the improved Auto-Level function adjusts your mic's gain based on distance, volume, and spatial detection for optimized audio levels.
- Onboard Reverb: 3 types of onboard reverb settings (Plate, Hall, and Studio) provide enhanced depth and richness in music recordings.
- Hybrid XLR and USB-C outputs: the dual options provide easy connectivity no matter the recording setup you're using. The micro-USB connector from the MV7 has been upgraded to a USB-C connector on the MV7+.
- MOTIV Mix integration: MOTIV Mix software is the key to unlock powerful onboard DSP features in every MV7+ when using the USB-C output. Configure and set up your microphone to personalize the vibrant LED touch panel and optimize mic settings, including the sound signature, gain, EQ, compressor, limiter, and more. Save presets for instant recall of settings.
Legendary Broadcast Sound
The mic takes its design and sonic cues from the Shure SM7B, a classic used on countless podcasts and radio broadcasts. Use the mic in close proximity to your voice and you'll find it exhibits a clear, intelligible, and high-quality sound. The frequency response is optimized for a rich and natural vocal reproduction. The MV7+ is also very well suited to vocalists and musicians, handling SPLs up to 128 dB and delivering a wide 50 Hz to 16 kHz frequency response.
Works with Your Analog or Digital Setup
Thanks to its multiple outputs, you can use this mic with nearly any podcasting setup. The mic works with your audio interface, field recorder, mixer, or computer (over USB-C) as well as select Android devices and iOS devices. The device is also MFi-certified.
Rugged Appointments for Sound and Use
The included foam windscreen has been extended to introduce an airgap for improved protection against plosives and p-pops, greatly simplifying your editing process. With its built-in ready-to-mount yoke, the mic offers a build quality that is rugged, with an all-metal construction for reliability in mission-critical circumstances.
Unidirectional Polar Pattern for the Untreated Room
The mic features a unidirectional cardioid polar pattern, which is the best natural defense against room noise: since the capsule mostly captures what's directly in front of it, you won't pickup as much room noise as you would with an omnidirectional mic. Depending on your particular room, you may still need a little room treatment, or use the mic's noise-reduction software, to address issues such as your computer's hum or your air conditioner—but the chances of that are markedly lower with a cardioid polar pattern.
Integrated Controls & High-Quality USB Audio
On the USB side, the mic provides broadcast-quality specs and intuitive functionality. Capture audio at sample rates and resolutions up to 48 kHz / 24-bit, which is the standard for editing and mixing broadcast audio. Use the integrated touch-panel interface on the mic itself to control levels, headphone volumes, monitor mix, and mic-mute.
Built-In 3.5mm Headphone Monitoring with Mix Control
The mic offers a headphone jack for monitoring. Just plug a pair of headphones into the MV7+'s 3.5mm jack, and you'll be able to listen to your high-quality audio in all its glory. Mix your mic output and system audio playback levels individually with dedicated sliders in the MOTIV Mix desktop app.
Shure SRH840 Headphones (qty 1)
The Shure SRH840 Professional Monitoring Headphones from Shure are perfect for Podcasting and critical listening.
A precisely tailored frequency response and 40mm neodymium dynamic drivers combine with total comfort and durability to provide the ultimate listening experience. The replaceable cable and included set of replacement ear pads ensure a long product life. Also includes threaded 1/4" (6.3mm) gold-plated adapter (comes with 1/8" and 1/4" options).
Apogee Duet 3 - Ultracompact 2x4 USB Type-C Audio Interface (qty 1)
Designed to be the audiophile-quality centerpiece of a mobile recording setup, the Apogee Electronics Duet 3 is a 2x4 USB Type-C audio interface bringing Apogee's legendary sonic performance and intuitive operability to an ultracompact, elegant, and durable form factor for musicians, producers, and songwriters in pursuit of their best sound no matter where they are. While the low-profile exterior combines an aluminum base with a Gorilla Glass top to make it durable and attractive, the internals boast built-in hardware DSP to power the included Symphony ECS Channel Strip plug-in for signal sculpting and polishing without bogging down your computer or iOS device.
It features two world-class microphone preamps with phantom power and plenty of gain to ensure robust amplification even for low-output ribbons and classic dynamics such as the Shure SM7B. It can also accept line-level signals or direct connections from instruments such as electric guitar and bass. With two balanced analog 1/4" TRS line/monitor outputs and a stereo 3.5mm headphone output, the Duet 3 can feed a set of monitors and your favorite headphones at the same time. The main and headphone outputs are independently addressable, giving the flexibility to route separate mixes to an artist in the studio, a performer onstage, or a house PA system.