 |
 |
 |
|
Warm Audio Active Direct Box
- Active direct box with Cinemag transformer
- Converts a high-impedance unbalanced signal to a low-impedance balanced signal
- Leaves your instrument’s tone and clarity intact
- Variable pad from -3dB to -30dB lets you set an optimal input level to prevent distortion
- Ground lift switch helps eliminate buzz and hum caused by ground loops
- Route your amp signal to a live mixer or recording interface
- Intuitive front- and rear-panel layout
- Sturdy all-metal chassis can withstand the most rigorous use
- 1,600+ operational hours on a set of fresh, high-quality 9V batteries
With a Cinemag transformer and a heap of functionality, the Warm Audio Active Direct Box is not your run-of-the-mill DI. Designed and manufactured to the same exacting standards as the rest of Warm Audio’s lineup of value-packed gear, the Active Direct Box converts high-impedance unbalanced signals from guitars, basses, and other instruments, to low-impedance balanced signals without compromising clarity or tone. The Warm Audio Active Direct Box includes a variable pad with a range of -3dB to -30dB—so you can input the optimal amount of signal to prevent distortion from overly hot sources,—and a ground lift switch to help knock out buzz and hum caused by ground loops. Unique among DI boxes, the Amp Out option lets you run your guitar or bass amp’s output directly into a mixer or recording interface. For a high-quality DI box at an incredible price, check out the Active Direct Box from Warm Audio.
Intuitive, full-featured inputs and controls
Plug in your guitar, bass, keyboard, or other high-impedance instruments on the unit’s front panel. The Thru jack sits beside it, for easy access to run a line out to your amp, and the converted signal exits the unit via a sturdy XLR jack on the rear panel. The front-panel switches include Phase, Ground Lift, and Amp Out. On the back panel, you can select passive or active operation, and choose to engage the variable pad.
Runs on 48V phantom power or dual 9-volts
The Warm Audio Active Direct Box is powered by 48V phantom power or by two 9-volts, with an operational life of 1,600+ hours on a fresh set of batteries. The unit autosenses 48V phantom power—switching the unit automatically into active mode—and includes a 48V indicator light. When operating on batteries, manually select active or passive mode via the back-panel toggle switch. The batteries are easy to remove and replace when the faraway day comes for a new set!
For more information on this or any Warm Audio product, visit www.warmaudio.com.
|
|
|
 |
|
 |
|