|
|
|
|
TK Audio T-Komp - Dual Mono Compressor
- Ratio which increases with the signal level
- Two ratio ranges, 1:1 to 20:1 or 1:1 to 2:1
- Feed-forward or feed-back mode
- Five RMS settings, fast to slow and an adaptive mode
- Blend control for parallel compression
- Input impedance: 24kohm
- Output impedance: 50ohm
- Max in/output level: +26dBu
- Frequency response: 20Hz to 20kHz +/- 0,1dB
- Signal to noise ratio @ 0dBu: better than 94dB
- THD: level and compression dependent, mostly even harmonics
The T-Komp has a unique design which offers a modern take on the old vari-mu ratio curve. The ratio is level dependent and increases with the signal level, a feature that will give you numerous possibilities.
To make the T-Komp more useful it has two ratio ranges. The first one goes up to 20:1, perfect for instrument tracking and smashing drums etc., the second, 2:1, is a more narrow range which makes it more suitable for bus compression.
The T-Komp can be selected between feed-forward mode for a punchy, modern response or feed-back mode with a smoother, more musical response.
The RMS detector has five settings, four from fast to slow where number four, the slowest, is similar to the old 160VU. The fifth position is a program dependent adaptive mode. For more information on this or any TK Audio product, visit www.tkaudio.se.
|
|
|
|
|
|
|