323.319.5936
View Cart My Account
Facebook
Instagram
Yelp
YouTube






















  Home > Recording > Outboard Gear > AD/DA Converters >

RME ARC-USB Advanced Remote Control USB
RME ARC-USB Advanced Remote Control USB


 
Alternative Views:


Retail Price: $199.00
Our Price: $179.00
You save $20.00!        


Availability: Ships in 24 to 48 Hours
Qty:

 
RME ARC-USB Advanced Remote Control

  • Direct access to actions and commands of your RME interface
  • More than 36 different commands can be assigned to the 15 keys at your fingertips
  • Automatically detected when plugged into USB port
  • UFX+ and UFX II can connect directly
  • Can control several interfaces simultaneously
  • Bus-powered with low current draw


Overview:

This wired remote has been designed for direct access to the most frequently used actions and commands of TotalMix FX, being an indispensable tool in the studio's daily applications. Its extremely flexible configuration through TotalMix FX will simplify workflow and greatly increase the usability of the RME interface in most real world situations.

The ARC USB is a USB 1.1 (UAC1) MIDI remote control, natively compatible to Windows and Mac OS X. As soon as it is present in the operating system TotaIMix FX will detect it and communicate with it, without disturbing other remote controls. Therefore it is also not necessary to switch the ARC USB on or off within TotalMix FX - it will just work. And because it communicates with TotalMix FX (via USB) it is compatible to all RME audio interfaces that are detected and supported by TotalMix FX. This goes back to RME interfaces released 2001!

As soon as the ARC USB is connected to a computer any button press or wheel turning will cause the respective action performed by TotalMix FX - and therefore also by the RME audio interface.

With the UFX+ and UFX II the ARC USB can also be connected directly to these devices, currently the only RME interfaces having an internal USB 1.1 host with matching connector. This way of connecting is handy in stand-alone mode, where the ARC USB is also supported by the UFX+ and UFX II.

The ARC USB is bus powered, but draws only little current. Also it uses USB 1.1 as bus standard, which these days is uncritical due to its lower frequency and speed demands. USB 2 cables with 5 meter to 10 meter length, and cheap USB 2 cable extensions that usually make a bus-powered interface fail will work perfectly for the ARC USB. Still at higher lengths RME recommends to use active USB 2 cables (also called extension or repeater cables), which are not expensive and work over lengths of more than 20 meters.

The ARC USB can control several interfaces simultaneously, which happens automatically as the Key Commands dialog in TotalMix FX is specific to the currently selected audio interface. Just assign only the functions that are desired for each respective interface. After that the ARC USB keys and the encoder wheel remote the respective interface where they have been assigned to, without the need to further switch or select anything in normal operation.

Key Commands:

  • Talkback: is lit dim as soon as the ARC USB is running on 5 V USB bus power.
  • Speaker B: is lit dim as soon as a USB communication is possible.
  • DIM: is lit dim as soon as a communication with TotalMix FX is established.
  • Therefore in normal operation all three lower keys are lit dim constantly.
  • Row 1 and 2: activating Snapshots 1 to 8.
  • Row 3: Mono, Volume Phones 1, Volume Phones 2, External Input
  • Lower keys: Talkback, Speaker B, Dim.
  • A set of stickers with all currently available TotalMix FX commands is included. These can be used to label all keys reflecting the current user configuration.
  • The rotary encoder wheel is used to change various parameters, like gain and volume. It is pro-grammable in TotalMix FX as well.

The Advanced Remote Control is configured in the Options menu via the Key Commands dialog of TotalMix FX, tab ARC USB Settings. As the ARC does not have any memory, all configuration and storage is done via TotalMix FX. All settings of the ARC USB are stored within a Workspace, and are therefore identical in all Snapshots of that current Workspace.

More than 36 different commands can be assigned to the 15 keys. The behaviour of each individual button can be changed between push, toggle, enable and disable, depending on the base function.

Available Functions:
  • No Funktion
  • Global Mute
  • Global Solo
  • Mute Group 1 to 4
  • Solo Group 1 to 4
  • Fader Group 1 to 4
  • Link Main AB
  • Speaker B Select
  • DIM (Main Out)
  • Mute (Main Out)
  • Mute FX (Main Out)
  • Mono (Main Out)
  • Talkback
  • External Input
  • Reverb
  • Echo
  • Cue Phones 1 to 4
  • Snapshot 1 to 8
  • Layout Preset 1 to 8
  • Volume Main
  • Volume Phones 1 to 4
  • Mic Gain 1, Mic Gain 2, Mic Gain 1+2
  • Inst. Gain 3, Inst. Gain 4, Inst. Gain 3+4
  • Mic/Inst. Gain 9, Mic/Inst. Gain 10, Mic/Inst. Gain 9+10
  • Mic/Inst. Gain 11, Mic/Inst. Gain 12, Mic/Inst. Gain 11+12


For more information on this or any RME product, visit www.rme-audio.com.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Outboard Gear > AD/DA Converters
Brands > Brands L - Z > RME
Recording > Audio Interfaces
Recording > Outboard Gear
Brands > Brands L - Z
Brands
Recording
Recording > Audio Interfaces > USB Audio Interfaces