 |
 |
 |
|
Discrete Class A circuit
100% analog signal chain
Fully compatible with almost every 500s module on the market
Fully operational as an empty frame (no 500s modules installed)
Also comes in 8, 24, 32, and 40 channel configurations
Configuration includes: "Master Section" and "8 Channel Section"
8 channel sections include: two 500 series slots per channel, inserts, AUX and group sends, faders, and meter bridge
Master section includes: analog summing, 4 groups of 500 series slots, stereo inserts (500 series slots), talk back, and monitor control section (3 parts)
Framed with ash wood finish including sides, front, and meter bridge
Other finishes built to order
External 3U PSU included
Looptrotter Modular Console is a perfect solution for all producers and engineers who already use 500s modules in their studios. It is fully customizable and compatible with almost every 500s module available on the market. The console was designed for ease of use and sized to fit modern recording facility. It can also be configured to an individual preference.
8 Channel Module
- Discrete Class A circuit
- 100% analog signal chain
- Alps faders
- Two 500s slots per channel
- One insert per, send, and return
- Adjustable panning
- L+R stereo link
- Mute function
- Solo function
- Two selectable work modes (sources) Record (MIC) and Mix (DAW)
- 4 Auxes per channel, pre/post fader assignable
- Direct to tape/DAW output with adjustable level
- Assignable to 5 different summing buses, 1-4 stereo summing groups, Master or both
- 8 LED meters
Master Module
- 5 stereo summing busses, 1-4 stereo groups and master channel
- Mute and solo switch for each group
- Inter-assignable summing groups
- Selectable mono or stereo link
- Two 500s slots on master channel
- Two 500s slots on each summing group (1-4), 8 in total
- Mute and Solo switch on each summing group
- External input with adjustable level
- DAW input with adjustable level
- Pre/Post fader aux master assign
- Aux master solo function
- Alps faders
- Solo LED meter
- Four LED summing group meters
- Two analog VU Meters
- Built in talkback microphone
- Intuitive talkback with adjustable routing: SLS, AUX
- Three talkback modes, stable, moment and auto
- Adjustable “listen” level
- Adjustable “talk” level
- External Talkback input with 48V phantom power and adjustable gain
- Studio listen input with 48V phantom power and adjustable gain
- Talkback footswitch
- SLS output
- Monitor section with A/B/C speaker select with adjustable trim for each speaker set
- Selectable monitor source: External, DAW, L+R
- Adjustable phones listening level
- Adjustable solo level
- Adjustable dim level
- Mute function
- Solo function
- Dim function
- Solo clear function
- DB25 stereo input
- DB25 group output
- DB25 ext output/AUX output
- DB25 main output/insert/DAW input
- DB25 Insert input
- DB25 Insert return
For more information on this or any Looptrotter product, visit www.looptrotter.com.
|
|
|
 |
|
 |
|