The Genelec 8010.LSE StereoPak is a complete 2.1 active nearfield monitoring system ideal for use in project studios in a limited space, for music or post production. This Stereopak includes two 8010 nearfield monitors and a 7040A subwoofer for accurate audio reproduction and frequency response down to 30 Hz. Each unit has a durable housing and offers balanced XLR connectors.
Product Features:
- Two 8010AP 3" Active Studio Monitors
- One 7040 Subwoofer
- Near Field Applications in Small Spaces
- Compact Design
- Low Frequencies Down to 30 Hz
- Minimum Diffraction Enclosure Technology
- Laminar Spiral Enclosure Technology
- Tone & Polarity Controls
The 8010 monitors feature 3" woofers and 3/4" tweeters in a Minimum Diffraction Enclosure (MDE) to tame box reflections and deliver a flat frequency response. The 7040A is a 6.5" subwoofer powered by a 50W amplifier. It has Genelec's proprietary Laminar Spiral Enclosure, which lowers noise and provides tight, consistent signal dispersion. Each unit offers switches for tone and polarity controls, thus allowing you to optimize the system for your workspace.
(2) Genelec 8010A Bi-Amplified Active Monitor (Producer Finish)
Styled in what the manufacturer has dubbed Producer Finish, the Genelec 8010A Bi-Amplified Active Monitor (Single) is designed for mixing and mastering in recording studios, broadcast facilities, and mobile work. The compact monitor utilizes independent 25W Class-D amplifiers to power a 3" woofer and a 3/4" metal dome tweeter housed in a die-cast aluminum enclosure. The monitor utilizes Genelec's Directivity Control Waveguide and Minimum Diffraction Enclosure designs to tame box reflections, flatten the frequency response from 74 Hz to 20 kHz, and provide a maximum SPL of 96 dB.
The amplifiers utilize Genelec's Intelligent Signal Sensing circuitry to conserve electricity, utilizing less than 0.5W in standby mode, 5W when idle, and 30W peak per amplifier at full output. The amplifier automatically detects the presence of an input signal and adjusts the power consumption of the monitor accordingly. A bass tilt control allows you to adjust the bass response to fit the acoustics of your listening environment. The included ISO stand helps reduce the transmission of structural vibrations into your work surface.
(1) Genelec 7040A Studio Subwoofer
Provided here in a dark gray producer finish, the Genelec 7040A Studio Subwoofer is a studio subwoofer designed to provide accurate low-frequency reproduction in limited production spaces. Its small footprint suits project studios, mobile vans, and portable recording systems.
This sub is the ideal complement to Genelec 8010A and 8020A monitors. It extends the low-frequency response down to 30 Hz, and uses Genelec's patented Laminar Spiral Enclosure (LSE) technology to provide both precise bass articulation and extended low-frequency capacity. When used in a stereo system, the sub can produce 100 dB of undistorted SPL by means of its 6.5" woofer, and its powerful Class-D amplifier.
Built-In Bass Management
Balanced XLR connectors are used for the audio inputs and outputs. There are two input connectors and two outputs. The bass-management unit in the 7040A subwoofer splits the input into low- and high-frequency components at 85 Hz. Frequencies below 85 Hz are reproduced by the subwoofer. Frequencies above 85 Hz are directed via the subwoofer's output connectors to the main monitors. The subwoofer's outputs have the same level as the inputs.
Adjustable Sensitivity
The subwoofer sensitivity can be adjusted from +12 to -6 dBu to match the subwoofer sound level easily with different monitors.
Variable Bass Roll-Off & Phase
Two BASS ROLL-OFF switches provide bass-response adjustment to compensate for the acoustical environment in three 2 dB steps. Two switches allow alignment of subwoofer phase with the monitors. The phase can be adjusted in 90-degree increments between 0 and -270°.
For more information on this or any other Genelec product, visit www.genelec.com.