323.319.5936
View Cart My Account
Facebook
Instagram
Yelp
YouTube






















  Home > Recording > Outboard Gear >

DACS Audio MICAMP II | Stereo Mic Preamplifier
DACS Audio MICAMP II | Stereo Mic Preamplifier


 
Alternative Views:


Our Price: $1,910.00


Availability: Usually Ships in 2 to 3 Business Days
Qty:

 
DACS Audio MICAMP II - Stereo Mic Preamplifier

  • Ultra low noise, ultra low distortion
  • Unmatched transparency of sound coupled with sonic punch
  • Gain settings in 6dB steps, from +20dB to +62dB, with a 0dB to +10dB trim control
  • Separate non-Phantom Power input coupled directly to gain stage for dynamic, ribbon and valve mics
  • Flat frequency response from below 20Hz to above 48kHz
  • Tri-segment LED display for clear metering
  • Easy to set up and use

The DACS MicAmp II is a 2 channel discrete-component-based microphone amplifier.

TECHNICAL SPECIFICATIONS
The DACS MicAmp is a very high performance unit. At this level every effort must be made to avoid compromising the quality of the signal path. Every aspect of the process has been examined, from the power supply to wiring to external connectors. Probably the changing of any one factor would make no noticeable or measurable difference, but cumulatively the attention to detail is worthwhile, particularly in long-term performance and reliability. Below are some notes regarding the technical aspects of the MicAmp, which is what makes this unit one of the best Microphone Amplifiers available.

POWER SUPPLY UNIT
The Dual Rail supply used in all the products uses LM317 variable regulators. These have been shown in a number of tests to be lower noise than standard 78/9 series regulators. DACS have also implemented additional ripple reduction circuitry. In addition most capacitors are Tantalum, not standard electrolytic. The main smoothing capacitors are 4700F per rail. The Phantom Power Supply is an op-amp based regulator giving extremely stable regulation.

Power distribution uses a star system to minimize any interaction between circuit elements.

EARTHING
The unit uses a star earth system where all earths go to the 0V terminal using heavy cable.

WIRING AND FIXING
Where connections are crucial they've been soldered directly to the PCB. This forms a more reliable long-term connection than plugs. All cables are loomed and firmly cable tied to the board. The audio cable is OFC, again producing a small benefit over the long term. No external connectors are PCB mounting. This ensures long-term reliability.

COMPONENTS
The input DC decoupling capacitors are metallized polyester of 5% tolerance. The input is protected by four ultra fast diodes. The transistors are stacked to improve thermal coupling and reduce lead length. They are mounted in a turned pin socket. The gain switching uses a self-cleaning rotary switch which is screwed to the PCB, then soldered, and the switching shaft is fixed to the screwed down portion of the switch body so that there is little or no mechanical stress on the PCB. The pot (conductive plastic tracks) is also mounted on a bracket to minimize PCB stress. The filter stage uses 5% metallized polyester capacitors too, to give accurate and stable filtering. The amplifier stage is decoupled from the filter and trim stage by a 100uF bi-polar electrolytic capacitor. The trimmers are all low noise trimmers with a wide track. Throughout, DACS have used Burr Brown OPA604s which are extremely high specification op-amps optimized for audio applications. In listening tests they have been preferred to NE5532s.

NOISE AND DISTORTION
EIN is -133dB relative to a maximum output of +22dBu. Distortion is very low, with THD+N figures of around .00025% @ 1kHz (measured in the audio frequency range). Input impedance is ca 1kOhm.

FREQUENCY RESPONSE
-3dB point at 48kHz, roll off at 6dB/octave Flat to less than 20Hz on phantom with subsonic roll off at 6dB/octave, DC coupled on non phantom inputs.


For more information on this or any DACS Audio product, visit www.dacs-audio.com.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Recording > Outboard Gear
Brands > Brands A - K
Brands
Recording
Recording > Outboard Gear > Microphone Preamps
Recording > Outboard Gear > Microphone Preamps > 2 Channel Microphone Preamps
Brands > Brands A - K > DACS Audio