Home > Recording > Outboard Gear > Microphone Preamps > Microphone Preamps with Sum Cable >

AEA Ribbon Mics TRP 2 | Dual Channel Ribbon Microphone Preamp | With Sum Cable TRS Version

AEA Ribbon Mics TRP 2 | Dual Channel Ribbon Microphone Preamp | With Sum Cable TRS Version


 
Our Price: $1,100.10

24 Months 0% Interest with Synchrony Music Card or Affirm




Availability: Special Order, Contact Us For Availability
Product Code: AEA-TRP2-SUMCABLEDTRS
Qty:

Description
 
  • 2 Channels with 83 dB of sweet and quiet JFET gain
  • Switchable phantom-power, polarity reverse, and high-pass filter
  • 63 ohm high-impedance circuitry provides better overall transients, frequency response, and high output sensitivity
  • Optimized for ribbon mics, condensers, and dynamics
  • IU half-rack with optional hardware for mounting one or two units together

  • Enhance Your Ribbons
    The AEA TRP2 Ribbon Preamp provides two channels of high-output, high-impedance, and low-noise gain with a rich and natural sound that brings out the full potential of your microphones. Specifically designed for ribbon microphones, the TRP2 excels at drawing out the warmth and lush sound that ribbons are uniquely known for.

    A Gain Powerhouse
    The TRP2 is a powerhouse that provides unparalleled high gain with low-noise. With 85db of JFET output, the TRP2 gives you enough juice to record soft sources without ever having to worry about noise. With the TRP2, you will never consider a source too quiet to record with a ribbon mic ever again. Passive ribbons with low output levels require preamps that supply a high level of output. If the preamp you use doesn’t have enough clean gain, the mic signal may seem too soft or noisy which may be apparent when recording quiet acoustic guitars or strings, especially at a distance or with long cable runs. The TRP2 eliminates this concern.

    Professional Features in a Compact Package
    The TRP2 is AEA’s second iteration of the high-performance TRP preamp with the addition of new features including phantom power, optional rack ears, and a switching power supply.Polarity reverse switches for ensuring proper polarity throughout the recording chain and switchable 100 Hz, 12 dB per octave low-frequency filters allow you to tame proximity problems. The TRP2 includes switchable phantom power that is capable of powering condensers and active ribbons. For engineers concerned about phantom power hurting their passive ribbons, there is phantom power kill switch, known as No Blow Mode, located internally within the unit that easily deactivates 48V from ever turning on.

    High Impedance Makes a Huge Difference
    The sound and tonality of dynamic microphones like ribbons and moving-coils are directly affected by the impedance of a preamp. The higher the impedance, the better the sound. The RPQ2 boasts an extra high input impedance of 63K Ohms. Preamps with an impedance of under 10k ohms will limit the lows, highs, and transients of your passive microphones. The RPQ2’s high impedance will reveal your microphone’s true nature– a thick low-end, open top-end, and articulate transient response that you will need to hear to believe. Both condensers and active microphones will also benefit from the RPQ2’s impedance.

    A Universal Power Supply
    An external switching power supply with a grounded AC plug is used with the TRP2 so hum fields can be kept away from the high-gain electronics. The power supply allows the TRP2 to be used in any country without any modifications made to the unit.

    Options to Rack the TRP
    The TRP2 is housed in a portable and lightweight half-rack aluminum chassis. This form factor allows you to easily take it to remote gigs, other studios, and on the road. The TRP2 can be easily racked with the optional TRP2 Rack Ears. Attach the rack ears to the TRP2 and unit can be securely installed in any standard rack. Two TRP2s can be mounted side by side in a single rack space by purchasing the AEA UTR Rack Tray. Screwing two TRP2s to the rack shelf, the whole assembly can be securely installed in any standard rack.


    For more information on this or any other AEA Ribbon Mics product, visit https://www.aearibbonmics.com.